午夜看片A福利在线观看,久久99精品国产99久久6尤物,在线的中文字幕Av,久久精品人人做人人爽电影蜜月

產品資料

Galil運動控制卡集成驅動器

如果您對該產品感興趣的話,可以
產品名稱: Galil運動控制卡集成驅動器
產品型號: DMC-2143-DC24+AMP20540
產品展商: 美國Galil
會員價格: 0.00 元
產品文檔: 無相關文檔

簡單介紹

Galil運動控制卡集成驅動器，Galil DMC-2143-DC24可選端子板、驅動器等附件介紹。


Galil運動控制卡集成驅動器  的詳細介紹

 

Galil運動控制卡集成驅動器詳細說明

Galil運動控制卡集成驅動器
AMP20540

AMP-205x0 2- and 4-axis 500W Servo Drives：
The AMP-20540 contains four transconductance, PWM amplifiers for driving brushless or brush-type servo motors.Each amplifier drives motors operating at up to 7 Amps continuous, 10 Amps peak,18–60 VDC (available voltage at the motor is 10% less). The gain settings of the amplifier are user-programmable at 0.4 Amp/Volt, 0.7 Amp/Volt and 1 Amp/Volt.The switching frequency is 60 kHz.The
amplifier offers protection for over-voltage,under-voltage, over-current, short-circuit and over-temperature.Theamplifier status can be read through the DMC-21x3 controller, and the BS command allows easy hall sensor set-up.A 2-axis amplifier board

the AMP-20520 is also available. In a standard configuration the
DB-28040 I/O board will not install next to an AMP-20540, however the
AMP-20540 provides 8 uncommitted analog inputs with 12-bit ADC
(16-bit optional)
Galil運動控制卡集成驅動器
Galil運動控制卡集成驅動器
DMC-2143-DC24+AMP20440
 
Galil DMC-2143-DC24四軸運動控制卡可選的附件規格
     
端子板 ICM-20100  Provides D-sub connectors for cost-effective connection to external drives
ICM-20105 Provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs 
ICM-20105T Provides D-sub connectors for interface to external drives in addition to optical isolation for inputs and outputs
驅動器      AMP-20420 Contains two 200W PWM drives for driving brush-type servo motors 
AMP-20440  Contains four 200W PWM drives for driving brush-type servo motors.
AMP-20341  Contains four small 20W linear drives for driving small brush-type servo motors 
AMP-20520  Contains two 500W PWM drives for driving brushless or brush-type servo motors 
AMP-20540   Contains four 500W PWM drives for driving brushless or brush-type servo motors 
AMP-20542 Contains four PWM drives for driving brushless or brush-type servo motors(3Amps Continuous, 5Amps peak at 18-60VDC). Software selectable for low inductance motors .
SDM-20240 Contains four small drives for stepper motors operating in full/half step mode 
SDM-20620 Contains two drives for stepper motors operating in microstepping mode 
SDM-20640 Contains four drives for stepper motors operating in microstepping mode 
附件 DB-28040 Provides 40 additional digital I/O and eight analog inputs 
DB-28104 Provides sinusoidal interpolation for Sin/Cos encoders 


 
產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!

魯公網安備 37021302000339號